Changing the PVID of a Physical Volume

Each physical volume used by AIX LVM has a unique physical volume ID, or PVID for short. The PVID is a software-generated ID that is stored in the header area of a disk (block 0). When a new disk is added to an AIX system, the new physical volume does not yet have a PVID. As soon as a physical volume is added to a volume group, a PVID is automatically generated if the physical volume should not already have a PVID. An already existing PVID is adopted.

A PVID can also be created manually, using the chdev command. The pv attribute is set to the value yes:

# chdev -l hdisk3 -a pv=yes
hdisk3 changed
#

The set PVID can be displayed either with the lsattr command or simply with lspv:

$ lsattr -El hdisk3 -a pvid -F value
00c276b0084049750000000000000000
$
$ lspv |grep hdisk3
hdisk3          00c276b008404975                    None                       
$

A PVID can also be removed again. However, the physical volume must not be in use for this (e.g. as part of a volume group).

To clear a PVID of a physical volume, the pv attribute can be set to the value clear:

# chdev -l hdisk3 -a pv=clear
hdisk3 changed
#

The PVID has been removed as shown by the following outputs:

$ lsattr -El hdisk3 -a pvid -F value
none
$
$ lspv |grep hdisk3
hdisk3          none                                None                       
$

Attempting to delete the PVID of a physical volume that is in use, results in the following error message:

# chdev -l hdisk0 -a pv=clear
Method error (/usr/lib/methods/chgdisk):
        0514-062 Cannot perform the requested function because the
                 specified device is busy.
     pv    

#